EIGD50LIW1 Frigidaire Dryer - Parts

This gray lint filter is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load to clear the air flow through the lint filter...

This is an adjustable foot for your freezer, refrigerator, and dryer. This part supports your unit by screwing into one of the bottom four corners, and adjusting the height of your machine. If your ap...

This screw is designed to fit washers and dryers. Refer to the diagram provided by the manufacturer for further installation instructions and accurate application of screw in your tool.

This is a screw and it is used with a variety of home appliances. It is less than 1/2 an inch long, and is #8-18 x 3/8. This part is a pan head, sheet metal, screw. It is made of metal.

This part senses the flame for heat allowing the gas valve to open.

Used for installing felt and rubber seals on dryers.

This is a genuine replacement drum roller for a dryer. This part includes a roller which has an axle and two tri-rings. The dryer drum roller holds the drum in place while it rotates on the dryer supp...

This dryer thermal fuse is a critical safety component designed to protect the appliance from overheating. It automatically shuts off power to the motor or heating system if excessive temperatures are...

This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is...

This dryer motor powers both the drum and the blower wheel. It includes a pulley for the drum belt and uses reverse threads to secure the blower wheel. For safety, disconnect power before installation...

This blower assembly, also known as a blower wheel and housing, is responsible for generating airflow through your dryer. It spins on the motor shaft to push air through the drum and out the exhaust v...