Models > WTMC1301US > Instructions

WTMC1301US (03) Bosch Dryer - Instructions

Jump to:

All Instructions for the WTMC1301US
1 - 4 of 4
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Philip from MOCKSVILLE, NC
Parts Used:
00491647
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top of door hinge arm broke.
Remove 4 screws on plastic cover of hinge that connects to the door. An assistant will come in handy at this point to hold the door. Then remove 2 screws holding hinge. Push up on hinge and pull out to remove hinge bracket. Hinge pins has plastic covers that need to be in place before attaching to the door. A small amount of vaseline will hold them in place.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from SHERIDAN, MT
Parts Used:
00491647
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Top part of door hinge broke
For this dryer a ratcheting screwdriver set was a must. Follow the directions from previous posts and you're done. Easy 5 minutes!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Laurence from WEBSTER, NY
Parts Used:
00491647
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door hinge broke
Removed old hinge and replaced with new.... Door works great! Thanks
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from FLINTVILLE, TN
Parts Used:
00491647
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Wrench set
The pot metal door hinge broke so I ordered on from this company.
The delivery date blew past and at day 11 of waiting, I fabricated a new hinge in my shop out of steel. The crappy pot metal replacement showed up two days later=13 days late. Now i have this $40 piece of pot metal garbage laying around that I'll never use because I made a hinge out of steel LIKE THE FACTORY SHOULD HAVE DONE IN THE FIRST PLACE. You people could have put the part in a $7 mailer envelope from the post office instead of shipping with the worst delivery agent in the free world (FedX). I hope I never need anything from your store again.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WTMC1301US
1 - 4 of 4