Models
>
WTG86401UC/07
WTG86401UC/07 Bosch Dryer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WTG86401UC/07
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$30.77
This approximately 3-inch long and 2-inch-wide door latch is used to secure the dryer door, and ensure it does not open while the appliance is in operation. This latch is made of durable white plastic...
In Stock
Order now and your part arrives by Mar 30
$70.05
This cover provides protection for internal components, helping maintain a clean and safe appliance interior. Made from durable materials, it ensures a secure fit and long-lasting performance. Install...
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
$41.42
This fluff filter traps lint and fibers during the drying cycle, helping maintain airflow and prevent overheating. It’s a genuine replacement for select Bosch, Thermador, and Gaggenau dryers. Made fro...
In Stock
Order now and your part arrives by Mar 30
$29.95
This door hook secures the dryer door during operation to prevent interruptions. Replace a damaged or worn hook to restore proper function and keep your appliance working safely.
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
$152.62
This drain pump helps remove water from the condenser area in your dryer, supporting efficient drying. It’s a genuine OEM part made for select Bosch, Thermador, and Gaggenau models. If your dryer isn’...
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
$28.64
This blower belt is for dryers. Blower belt rotates to turn the blower wheel.
In Stock
Order now and your part arrives by Mar 30
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WTG86401UC/07
Viewing 3 of 3Door won’t close
Fixed by these parts
How to fix it
Door Pops Open
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lawrence from SARASOTA, FL
- Parts Used:
- 00145623
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers
DR error stopped machine. Had to diagnose problem.
You tube videos use to guide me.
Cleaned it sump area. Still not work.
Guessed it was pump. 5 hours over a period of 2 weeks
Ordered pump.
Replaced it.
Problem solved.
5 or so more hours. Most of work opening side panel
Cleaned it sump area. Still not work.
Guessed it was pump. 5 hours over a period of 2 weeks
Ordered pump.
Replaced it.
Problem solved.
5 or so more hours. Most of work opening side panel
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from SPRING BRANCH, TX
- Parts Used:
- 00633707
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Front cover had a broken lense over the control panel. Upon replacement of the cover I broke the knob off. I would recommend that you purchase the knob instead of doing it twice like I did.
Power OFF. Move dryer away from the wall. Make sure the knob is in the "OFF' position. Remove screws (2) holding top cover from back of dryer. Remove "BOSCH" cover plate from left side of front cover. There is a screw here holding the cover to the frame. Gently pry cover away from framework, being careful not to damage the cover clips. On
... Read more
ce away from the dryer, remove the plug from the board. You will need to remove the board from the back of the cover to gain access to the knob. Make sure the knob aligns with the "OFF" position before reassembly. Reverse the the instructions for reassembly.
Read less
Was this instruction helpful to you?
Thank you for voting!