ALG443RAC-PALG443RAC Amana Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jack from Tinley Park, IL
- Parts Used:
- R0000410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Dryer did not shut off automatically
I removed the top cover and located the faulty timer. I then noted the part number, placed the order and the part came the NEXT DAY via regular mail! I replaced the timer, making sure to reconnect the wires to the appropriate connectors. The dryer has been working fine ever since. I am extermely pleased with PartSelect.com. I not only saved myself the price of a new dryer, but I also saved nearly 1/2 off the replacement part based on a quote from a local retail store.
I'm glad I found your website :)
I'm glad I found your website :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from St. Louis, MO
- Parts Used:
- R0000410
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Dryer was operating but the timer would not advance so it kept drying with heat and would not shut off. Danger!!
Installed new timer control unit . Dryer then operated normaly.
the timer moter bench tested ok. I wonder if there was really a problem with a relay that keeps the timer on during the cycle.
the timer moter bench tested ok. I wonder if there was really a problem with a relay that keeps the timer on during the cycle.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Forrest from Dayton, OH
- Parts Used:
- R0000410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
timer would not turn off drying cycle
unplugged power cord, pulled timer knob off of stem, removed screws at rear of control panel, swung top of panel forward, LEAVE WIRES ON TIMER, used screw driver to release timer lock tab, turned timer to unlock retaining tabs, NOW REMOVE WIRES ONE AT A TIME AND PLACE ON CORRESPONDING TAB ON NEW TIMER, install new timer by placing tabs in openings and turned to lock in proper position, making sure lock tab snapped into place, put panel back in position, replace screws, replace knob on timer stem, plug power cord in, test cycle for operation,CONGRATULATIONS, it works!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from BLOOMINGTON, MN
- Parts Used:
- R0000410
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Timer failed
Some of the dismantling was intuitive, and I had to withdraw the dryer from the wall more than I anticipated. The old mechanism screwed into place, but the new unit slid into place in slots. Once that was realized, the repair was simple. A how-to enclosure would have been handy, but I tried YouTube and found most of the stipulations. Glad I didn't have to have a service call, or worse, a new dryer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Don from Sebastopol, CA
- Parts Used:
- R0000410
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
DryerTimer would not countdown off any set time
Removed Timer Knob,,Removed 6 screws at rear top of control panel,Removed 3 inch metal panel at top of control panel,,then tilted entire assembly toward front of dryer to gain axcess to timer assembly.. Removed 1 screw holding timer in place and then twisted entire timer assembly counterclockwise to remove,,Installed new timer (note new timer latched in hole did not have to install single screw onto new timer) Switched wires carefully not to mix them up..
Was this instruction helpful to you?
Thank you for voting!