Models > MDB4949SKB4

MDB4949SKB4 Whirlpool Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MDB4949SKB4

Viewing 8 of 8
Keep searches simple, eg. "belt" or "pump".
The mounting bracket is used to secure the top part of your dishwasher to the underside of your counter or cabinet. If you have solid surface counters (granite, quartz, etc.) you will likely need to s...
In Stock
Order now and your part arrives by Mar 19
Sold individually.
In Stock
Order now and your part arrives by Mar 19
This hose clamp is sold individually.
In Stock
Order now and your part arrives by Mar 19
$22.00
In Stock
Order now and your part arrives by Mar 19
$55.03
In Stock
Order now and your part arrives by Mar 19
$50.95
In Stock
Order now and your part arrives by Mar 19
$20.95
In Stock
Order now and your part arrives by Mar 19
$22.00
In Stock
Order now and your part arrives by Mar 19
$26.73
Enhance the performance and appearance of your dishwasher with this black outer access panel. Positioned at the bottom of the unit, it conceals wiring and internal components, contributing to both saf...
In Stock
Order now and your part arrives by Mar 19
$45.27
In Stock
Order now and your part arrives by Mar 19
$27.76
In Stock
Order now and your part arrives by Mar 19
$24.10
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MDB4949SKB4

Viewing 8 of 8
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not draining
Fixed by these parts
Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing
How to fix it
Will not dispense detergent
Fixed by these parts
Fixing
How to fix it
Not drying dishes properly
Fixed by these parts
Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Judith from Essex, MA
Parts Used:
WP8269145
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
76 of 116 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roger from CAMPBELLSVLLE, KY
Parts Used:
W11497943
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Getting codes on display E1 E9. Pump not draining. It would drain after pump cooled down.
After unplugging the dishwasher, removing the water supply hose, and disconnecting the drain hose, I removed the dishwasher from under the cabinet. I turned the dishwasher on its side, exposing the drain pump. I removed the electrical connection wire by sliding the white keeper forward and then using a small screwdriver, I pushed in on the black clip securing the plug. I then found the clip holding the pump and rotated the pump from the sump area. I installed the new pump in the same way I removed it. Reinstalled the water line, pump hose . Put unit back and plugged it in. Turned on dishwasher. Works perfectly now.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roy from HIGGINSVILLE, MO
Parts Used:
WP8269145
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken Mounting bracket
Removed old part and replaced with new part
8 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!