DW80M9550US ((AA-0000)) Samsung Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from kennewick, WA
- Parts Used:
- DD97-00403E
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
I replaced the pump assembly with a new drain hose
This is not a repair for the faint of heart. You will have to pretty much disassemble the entire dishwasher to replace the main pump assembly. And it’s not cheap, between the pump assembly and the hose...it was over $300...
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump assembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump assembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cheryl from PASCOAG, RI
- Parts Used:
- DD64-00146B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
My front panel on my dishwasher was dented.
Extremely easy! Unscrewed 6 screws and simply put the panelin place and screwed back into place! Perfect fit!
We just finished a kitchen remodel and that was the only eyesore. Thank you Part Select!
We just finished a kitchen remodel and that was the only eyesore. Thank you Part Select!
Was this instruction helpful to you?
Thank you for voting!