DDW24M999UM (DA) Samsung Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from kennewick, WA
- Parts Used:
- DD97-00403E
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
I replaced the pump assembly with a new drain hose
This is not a repair for the faint of heart. You will have to pretty much disassemble the entire dishwasher to replace the main pump assembly. And it’s not cheap, between the pump assembly and the hose...it was over $300...
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump assembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump assembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Big Spring, TX
- Parts Used:
- DC62-30314L
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
No water
1) Unplugged unit
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply valve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply valve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
Was this instruction helpful to you?
Thank you for voting!