Models
>
DW80R9950UG
DW80R9950UG (AA-00) Samsung Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DW80R9950UG
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$6.25
This door guide cap (part number DD67-00113B) is for dishwashers. Follow appropriate safety practices when installing door guide cap DD67-00113B.
In Stock
Order now and your part arrives by Mar 21
On Order
On Order
$6.25
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
In Stock
Order now and your part arrives by Mar 21
$115.95
The tub gasket creates a watertight seal between the dishwasher tub and door.
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$29.82
This leveling leg (part number DD61-00331B) is for dishwashers. Leveling leg DD61-00331B supports the dishwasher. Adjust the height of the leveling leg to make the dishwasher level. Unplug the dishwas...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for DW80R9950UG
Viewing 3 of 3Leaking
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from kennewick, WA
- Parts Used:
- DD97-00403E
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
I replaced the pump assembly with a new drain hose
This is not a repair for the faint of heart. You will have to pretty much disassemble the entire dishwasher to replace the main pump assembly. And it’s not cheap, between the pump assembly and the hose...it was over $300...
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump a ... Read more ssembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump a ... Read more ssembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Big Spring, TX
- Parts Used:
- DC62-30314L
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
No water
1) Unplugged unit
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply va ... Read more lve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply va ... Read more lve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
Read less
Was this instruction helpful to you?
Thank you for voting!