Models
>
NDU4CA-40
NDU4CA-40 Norge Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for NDU4CA-40
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$7.95
This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...
In Stock
In Stock
In Stock
In Stock
In Stock
This tub baffle is two inches long. It is all black in color and is made entirely of plastic. This baffle is intended for use with some dishwashers.
No Longer Available
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for NDU4CA-40
Viewing 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bessie from Fruitland Park, FL
- Parts Used:
- Y03000108
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Spring that holds door closed
First, removed screws on bottom panel. On this model, everything was easy to see. Did not have to move the appliance at all. The left side wire was broken. Just removed the broken part, connected the new wire, and then the springs to it. No problem at all. Took about 15 mins.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- clarence from ST LOUIS, MO
- Parts Used:
- Y03000182
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Wouldn"T Drain The Water Completey
Removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. . . )
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chung from Petaluma, CA
- Parts Used:
- Y03000108
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door mechanism broken
First removed the two screws and then the bottom part of the door. Replaced the broken cable & eyelet assy with the purchased part. Connect the eyelet with the two springs which tied with door mechanism with other cable/eyelet assy. Done
Was this instruction helpful to you?
Thank you for voting!