Models
>
MDB7851AWS2
MDB7851AWS2 Maytag Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MDB7851AWS2
Viewing 11 of 11Keep searches simple, eg. "belt" or "pump".
This kit includes the black plastic handle (white handle is no longer available from the manufacturer), the latch, and two switches. The door handle and latch assembly is a simple on/off mechanism tha...
In Stock
$27.75
This is a genuine OEM replacement silverware basket for your dishwasher. It is gray in color and comes as an assembly with a hinged cover and a handle. The basket sits in the front of the bottom rack ...
In Stock
This is the door latch and switches only. The handle is not included with this part.
In Stock
In Stock
The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.
No Longer Available
In Stock
$156.00
This part provides a waterproof seal between the tub and the door. Also known as Gasket.
In Stock
$7.91
This ball bearing is a genuine OEM replacement part for your dishwasher. This part consists of one ball bearing. The ball beaaring is used in the upper dishrack roller to make it slide out with ease. ...
In Stock
In Stock
In Stock
This part releases the detergent and rinse aid into the dishwasher.
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for MDB7851AWS2
Viewing 9 of 9Door latch failure
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Will not dispense detergent
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Touchpad does not respond
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Philip from Carlsbad, CA
- Parts Used:
- WPW10130695
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was
... Read more
easy, about 30 minutes in all, most of which was spent figuring out which breaker to pull so as not to get shocked. One note of caution: use the correct screwdriver attachment (not a Phillips head or regular, but a star or something- see I am not a handyman but I do have a $15 screwdriver set that just paid for itself 10 times over!).
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Livonia, MI
- Parts Used:
- WPW10130695
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Plano, TX
- Parts Used:
- WP6-918873
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The utensil basket was old, bowed and the bottom was falling out.
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too.
Was this instruction helpful to you?
Thank you for voting!