Models > DU55CA-55 > Instructions

DU55CA-55 Magic Chef Dishwasher - Instructions

Jump to:

All Instructions for the DU55CA-55
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bessie from Fruitland Park, FL
Parts Used:
Y03000108
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Spring that holds door closed
First, removed screws on bottom panel. On this model, everything was easy to see. Did not have to move the appliance at all. The left side wire was broken. Just removed the broken part, connected the new wire, and then the springs to it. No problem at all. Took about 15 mins.
10 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
clarence from ST LOUIS, MO
Parts Used:
Y03000182
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Wouldn"T Drain The Water Completey
Removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. . . )
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Mt. Pleasant,, MI
Parts Used:
793117
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob retainers were broken and knob kept falling to floor.
Lined up knob and pushed it into door.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chung from Petaluma, CA
Parts Used:
Y03000108
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door mechanism broken
First removed the two screws and then the bottom part of the door. Replaced the broken cable & eyelet assy with the purchased part. Connect the eyelet with the two springs which tied with door mechanism with other cable/eyelet assy. Done
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tracy from Montour Falls, NY
Parts Used:
Y03000108
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door spring broken
It was really easy- Loved the fact that you had a picture of the part needed on your website, it really made finding the part we needed very easy. I would highly recommend your site- the part came quickly, also
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Northville, MI
Parts Used:
R0913111
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Pump seal elak
Removed motor and found shaft severely rusted. Cleaned up the rust but the shaft was too pitted to work effectively with the new seal.Wasted my time and money
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Philadelphia, PA
Parts Used:
Y03000108
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Cable for door springs broke
Attached new cable and eyelet to existing springs. Took all of 5 minutes to install. Very easy. Works great.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DU55CA-55
1 - 7 of 7