Models
>
DUAG27HN
DUAG27HN (ASTESNA) LG Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DUAG27HN
Viewing 11 of 11
Keep searches simple, eg. "belt" or "pump".
$15.26
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
In Stock
Order now and your part arrives by Sep 5
$15.26
Keep your dishwasher’s dish rack stable and secure with this compact gray holder, also known as a mounting bracket. Measuring 1 inch by 1 inch, it plays a key role in preventing the rack from moving d...
In Stock
Order now and your part arrives by Sep 5
$66.86
This rubber door gasket creates a watertight seal around the dishwasher tub, helping prevent leaks and improve wash performance. Made from heat-resistant material, it’s built to last and withstand reg...
In Stock
Order now and your part arrives by Sep 5
In Stock
Order now and your part arrives by Sep 5
$67.93
If your washer isn’t draining like it should, this LG drain hose assembly might be the fix. It comes with a flexible rubber hose and plastic connectors to guide water from the tub to your drain. Thing...
In Stock
Order now and your part arrives by Sep 5
$98.09
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
In Stock
Order now and your part arrives by Sep 5
In Stock
Order now and your part arrives by Sep 5
In Stock
Order now and your part arrives by Sep 5
$15.26
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clip...
In Stock
Order now and your part arrives by Sep 5
$29.98
This micro switch detects specific positions or actions within the appliance and signals components to activate or stop accordingly. Designed for precise response, it is replaced when functions fail t...
In Stock
Order now and your part arrives by Sep 5
In Stock
Order now and your part arrives by Sep 5
$29.98
This rack is a replacement support component designed to hold cookware or items securely at adjustable heights. It promotes safe handling and space efficiency and is commonly replaced when bent, rusted, or unstable.
In Stock
Order now and your part arrives by Sep 5
Common Problems and Symptoms for DUAG27HN
Viewing 5 of 5Leaking
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Will not fill with water
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bruce from Katy, TX
- Parts Used:
- 3920DD3005H
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Dishwasher leaking; got AE error almost every other wash
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the
... Read more
gasket will form a better seal around the door.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lenny from KIRTLAND, OH
- Parts Used:
- 4581DD3003C
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jordan from West Chester, PA
- Parts Used:
- AGM30000201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Top rack not washing, found hole in the rubber boot that connects the manifold at the bottom to the tubes that run up the back which deliver water to the top spinners.
Remove the lower dish rack, and remove the filter and screen. Using a screwdriver, remove the 4 screws that attach the bottom wash arm, and lift off. Remove the retaining screw on the rubber boot. Slide the boot off of the square steel tubes (there is a metal clamp around this connection, you may need to use pliers to open it. The cla
... Read more
mp mechanism is a simple latch that you have to push apart from the two tabs). Open the clamp that came with the replacement part and examine the mechanism to see how it needs to be oriented to secure it. Slide the new boot on, close and latch the clamp. Replace the retaining screw, then the main bottom wash arm with it's 4 screws, the replace the screen and filter and bottom rack.
Read less
Was this instruction helpful to you?
Thank you for voting!