ADFD5448AT LG Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kenneth from BOX SPRINGS, GA
- Parts Used:
- EBF64375202, 4681ED3001D
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Wrench (Adjustable)
Dishwasher would stop during the cycle with nE code
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwasher. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lenny from KIRTLAND, OH
- Parts Used:
- 4581DD3003C
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from YONKERS, NY
- Parts Used:
- MEG64438801
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
to change the clip that holds the the upper rack the whole rail must be changed
you need to carefully apply a little pressure to the rail moving it back towards the back of the tub, this will let it unhook from the tub, then just slide the new rail into place.
Was this instruction helpful to you?
Thank you for voting!