The spray arm works by rotating to distribute water throughout the dishwasher, ensuring that both racks of dishes come out clean. If your dishes are not coming out of the dishwasher as clean as they s...
This genuine OEM upper spray arm mount is used to hold the spray arm to the top rack in your dishwasher. This part is made of plastic and has been redesigned by the manufactured so it may look differe...
This authentic OEM part is a wash arm bearing ring for your dishwasher. The bearing ring works in conjunction with the bearing nut to hold the lower spray arm in place. A sign you may need to replace ...
This genuine OEM seal fits under the lower spray arm in your dishwasher. It is also known as a bearing ring and is used to create a seal between the spray arm and the sump housing. The part measures a...
The door gasket provides a water tight seal, between the tub and the door, to keep water from leaking out of your dishwasher. If the dishwasher is leaking you may need to replace the door gasket. Thi...
This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking and helps with the ...
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of wat...
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
In Stock
Order now and your part arrives by May 24
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
July 22, 2022
When you push start button lights come on but no water enters. It will go thru the process without water. If you cancel you can hear pump run to drain but there is no water, the float is clear of anything, what could be keeping from getting water?Thanks ld
For model number KUDM24SEBL1
Hi Larry,
Thank you for your question. If your dishwasher will not fill with water and you have checked the float, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the float switch and the door latch and switch. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Removed spray arm thumb nut. Removed spray arm. replaced worn and broken earings and re-assembled in reverse order. Would have done the repair a lot sooner if I had known that PartsSelect was just a few miles up the highway.
The plastic parts on this spray arm assembly wear with time and the rotation wobble effect creates a wave action in the pool of water at the bottom of the dishwasher. This waves the water onto the front door and forces a leak outside the unit. Replace the lower arm assembly, washer, bearing and nut. They all wear. Also remember to tigh
... Read moreten the screws on top of the pump assembly. They loosen and aid in the wobble. Good Luck!
