Models
>
KDTM804KBS1
KDTM804KBS1 KitchenAid Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$15.26
The mounting bracket is used to secure the top part of your dishwasher to the underside of your counter or cabinet. If you have solid surface counters (granite, quartz, etc.) you will likely need to s...
In Stock
Order now and your part arrives by Mar 27
$49.29
The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will ne...
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
$19.63
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
In Stock
Order now and your part arrives by Mar 27
$56.24
The water inlet valve assembly (part number W11434044) supplies water to the dishwasher. It includes the valve, inlet hose, and hose clamp.
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
$105.12
Enhance your dishwasher's performance with this Circulation Pump Filter Assembly, designed to ensure proper water flow and filtration. This OEM replacement part helps prevent clogs caused by food debr...
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
$49.29
This durable hose connects the dishwasher’s circulation pump to the sump, allowing proper water flow during operation. It’s designed to handle daily use and resist damage from heat and pressure. If yo...
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for KDTM804KBS1
Viewing 8 of 8Leaking
Fixed by these parts
How to fix it
Door latch failure
Fixed by these parts
How to fix it
Will not fill with water
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Will not dispense detergent
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Judith from Essex, MA
- Parts Used:
- WP8269145
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from BIRMINGHAM, MI
- Parts Used:
- W11434044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Inlet valve leaking at water connection
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m
... Read more
achine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from N KINGSTOWN, RI
- Parts Used:
- W11434044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Hose threads stripped
I found it best to lay the dishwasher on it's side, this makes it easier to attach a 90 degree hose fitting without cross threading the plastic fitting.
Was this instruction helpful to you?
Thank you for voting!