Models > 58714402400 > Instructions

58714402400 Kenmore Dishwasher - Instructions

Jump to:

All Instructions for the 58714402400
1 - 8 of 8
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Daniel from Cutchogue, NY
Parts Used:
5304535183
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken latch
removed front face of dishwasher removed 2 screws holding latch and removed 2 push in plugs reinstalled the same.
job completed in less than 15 min.
28 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from PORTSMOUTH, NH
Parts Used:
5304461023
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Replace Dishwasher basket
Simply remove the old basket and replace with the new basket
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Clarkfork, ID
Parts Used:
5304535183
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
door would not lock
replaca latch as you mentioned
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Spencer from South Saint Paul, MN
Parts Used:
5304535183
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Plastic Latch Mechanism Broke
This was a quick job once I had the part. I removed the door panel and control panel. Replaced the latch and put everything back together. Simple!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karen from Southfield, MI
Parts Used:
5304525235
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Worn out wheels on bottom rack
Bought a new one
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from East Quogue, NY
Parts Used:
154225602
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Leaking dishwasher drain hose
I removed my dishwasher from the cabinet space by first disconnecting the water supply. Two screws holding the washer in were removed also. It then simply slid out. I disconnected the hose from the dishwasher and the sink piping with a socket driver and reinstalled the new one in its place. In reverse order I re-installed the washer to the cabinet and tried it out. No leak! I have to note that I do not recommend going to an appliance store and purchasing non-genuine parts. They come in standard lengths of 6 feet which is not enough when installing into a cabinet. This part is 10 feet long when going with the appliance manufacturer. That's plenty for most installations.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 58714402400
1 - 8 of 8