36315459992 Kenmore Dishwasher - Parts

If the upper rack in your dishwasher is not sliding in and out properly, the rollers may need to be replaced. Faulty rollers can also cause your rack to fall off the track, the door may not close prop...

This wheel is located on the front lower rack. It includes the axle. Sold individually.

This is a genuine OEM corner tub baffle for the lower left-hand side of your dishwasher. It is made of black plastic, and is used to prevent water from leaking out of the dishwasher while it is operat...

This silverware basket is gray.

This is a manufacturer-approved lower dish rack with six wheels and supports. The lower dish rack is where dishes are placed in the bottom portion of the dishwasher to be cleaned during the wash cycle...

This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of wat...

This upper dishrack assembly holds dishes and cups in the top section of the dishwasher. It includes the rack and wheels for smooth sliding. Replace it if the original is damaged or not holding items ...

This part helps keep the rinse aid the dispenser until its needed.

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...

This upper track roller kit comes with a screw for easy assembly.