JDB2100AWB Jenn-Air Dishwasher

the only thing that I wish was that the website had been more descriptive of the item. I ordered the two listed because it didn't say whether it was one side or both sides of a split basket. Now I have two complete baskets in different shades of grey! Only needed to order one maybe this will help someone else with the same problem. Gr ... Read more eat service and fast delivery though! Will order from this site again if I ever need anything else!

Most of the time was spent pulling out the dishwasher from under the counter, as a new tile floor had been installed after the DW was installed.

Great pictures of components on this website confirmed what part to order.

Shut off water feed to DW and disconnect power to DW.

Unplug wire connector to old ... Read more valve (solenoid) and disconnect water inlet hose. Observe that valve is attached to sheet metal bracket.

Remove bracket, with valve attached. Don't remove valve from bracket. New valve comes with sheet metal bracket.

Remove female threaded adaptor (brass) from back of old valve and screw on to new valve using Teflon tape. That is the only piece you need to reuse.

Attached the new bracket (with valve attached) to DW. Attach water inlet hose. Attach plug to new valve.

Turn on water to DW. Check for leaks. Retighten hose connection if required. Run dishwasher. Keep lower panel off for a couple of days to be certain no leaks develop.

I had to remove the 4 screws holding the toe panel. Then I had to take out the one screw holding the floater switch housing in place. It snapped open to release the floater and that just lifted out. I put the new float in and snapped the new housing on. I put the screw back in to hold the housing in place attached the two wires to the swi ... Read more tch and put the toe panel back on. It was all very easy to do and my first home repair went very well. thank you.