Models
>
GSS1800Z
GSS1800Z General Electric Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GSS1800Z
Viewing 4 of 4
Manuals & Guides for GSS1800Z
Click to downloadInstall
Installation Instructions
(1.10MB)
Manual
Owner's Manuals
(2.01MB)
Specs
Product Specifications Sheet
(0.07MB)
Care
Use and Care Manual
(0.36MB)
Keep searches simple, eg. "belt" or "pump".
This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.
No Longer Available
It provides a seal between the tub and the door to prevent water from leaking.
No Longer Available
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
No Longer Available
Special Order
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GSS1800Z
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Andrew from Jay, VT
- Parts Used:
- WD13X10051
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
broken door latch
Removed the top face plate, approx 7 Phillips screws,however, the latch mechanism is held by 2 Torx screws, the 4 electrical spade connectors were not that easy to pull off, but connected easily to the new part.
Ordered a Black latch, received a white one!
Oh well, it's easy to see it.
Checked the existing gasket, servicabl ... Read more e, so kept the new one in reserve.
MYSTERY, the one & only paper in the package referred to a slinger washer install on a fan motor for a REFRIGERATOR!!
instruction sheet # 5303950152 Rev 8/01
Go figure!
Ordered a Black latch, received a white one!
Oh well, it's easy to see it.
Checked the existing gasket, servicabl ... Read more e, so kept the new one in reserve.
MYSTERY, the one & only paper in the package referred to a slinger washer install on a fan motor for a REFRIGERATOR!!
instruction sheet # 5303950152 Rev 8/01
Go figure!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ryan from NOVATO, CA
- Parts Used:
- WD13X10052
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Dishwasher would not start
I thought my dishwasher was broken and I actually ordered another dishwasher. I went to the GE website and my model number came up not found. I did some further research and found partselect. My model number came up right away. For the fraction of the price of a new unit I decided I would give it a shot. I got next day delivery and instal
... Read more
led the part right away. Step 1: turn the power off 2. Open the dishwasher and take the screws out on the inside of the unit. 3. The front handle area comes off. 4. Take a picture of how the unit is wired (I wired it backwards at 1st and blew the breaker) 5. Use needle nose pliers and take off the four wires. 6. Put the new handle on the same way the old one came out 7. Put all screws back. That's it.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brad from Saint Paul, MN
- Parts Used:
- WD13X10052
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The locking mechanism broke so the door handle was loose and didn't work.
Took off panel to get to where the door handle is. Unplugged the old broken one and replaced with new one. Super easy to do.
Was this instruction helpful to you?
Thank you for voting!