Models > GSC452-01

GSC452-01 General Electric Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GSC452-01

Viewing 2 of 2
DISHWASHER MECHANISM Diagram and Parts List for General Electric Dishwasher
DISHWASHER MECHANISM
Section Diagram and Parts List for General Electric Dishwasher
Section
Keep searches simple, eg. "belt" or "pump".
Dishwasher Water Inlet Valve – Part Number: WD15X93
$48.36
This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or ...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$24.10
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
In Stock
Order now and your part arrives by Mar 19
Screw - Package of 12 – Part Number: WZ4X345D
$34.97
In Stock
Order now and your part arrives by Mar 19
Portable Dishwasher Hose and Faucet Kit – Part Number: WD35X194
This kit comes complete with the hose and coupler for hooking up a portable dishwasher to a faucet. It also contains the faucet adapter and washer.
No Longer Available
Lower Rack Roller with Clip – Part Number: WD12X5026
Sold individually. Order quantity required.
No Longer Available
COVER SUMP – Part Number: WD12X5028
$47.33
Special Order
Lower Dishrack - Rack Only – Part Number: WD28X304
$181.30
Wheels must be ordered separately.
Special Order
LATCH Assembly – Part Number: WD13X5014
$166.95
Special Order
ROLLER & STUD UPPER RACK – Part Number: WD12X10360
No Longer Available
ROLLER TUB – Part Number: WD12X5024
$31.88
Special Order
TERMINAL – Part Number: WD1X1440
No Longer Available
UNKNOWN – Part Number: WD12X5016
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GSC452-01

Viewing 4 of 4
Will not fill with water
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing
How to fix it
Not draining
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Don from Mount Vernon, IL
Parts Used:
WD15X93
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)
1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to g ain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.

Install new valve by reversing the procedure.
Read less
71 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Polson, MT
Parts Used:
WD15X93
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable)
Little/no water coming in & dirty dishes
1. Remove access panel under door. 2.Shut off hot water.3. Shut off electric to washer.4. Disconnect water line from water inlet valve.5. Remove small outlet water line from valve. Replace valve & reconnect. OR !!! 1.Take solenoid valve & bracket off of original inlet valve 2. Pull out white plastic diaphragm cover. 3. Remove diaphragm & clean out water holes with a pin. 4. Reassemble valve. 5. Reinstall original water inlet valve & save $27.00
Read less
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Dallas, TX
Parts Used:
WD15X93
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set, Wrench set
Thanks for sending the correct part. You guys did a great job.
Just put the part on.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More