Models
>
GDF535PSR6SS
GDF535PSR6SS General Electric Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GDF535PSR6SS
Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
$13.60
The roller helps the lower rack of your dishwasher to smoothly slide in and out of your appliance. A broken or worn roller wheel can make it clunky or difficult to get the rack in and out of the dishw...
In Stock
Order now and your part arrives by Mar 21
$26.73
Please be informed that this OEM-verified part that DOES NOT come with the heatshield, as per GE directly and are no longer required. This lower spray arm assembly in your dishwasher distributes water...
In Stock
Order now and your part arrives by Mar 21
$30.85
If your dishwasher is leaking water while it is running, there may be an issue with the gasket. Also known as a door gasket, the tub gasket creates a watertight seal between the tub of the dishwasher ...
In Stock
Order now and your part arrives by Mar 21
$90.32
This is an authentic lower dishrack with wheels. Please note that the manufacturer has made a design change, which requires the silverware basket to be relocated from the door to the inside of the rac...
In Stock
Order now and your part arrives by Mar 21
$33.94
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146
Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers w...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$56.17
This heating element helps your dishwasher clean and dry dishes by heating water and aiding in moisture evaporation. It’s made of black metal and located at the bottom of the tub. The dimensions are r...
In Stock
Order now and your part arrives by Mar 21
$15.70
PLEASE NOTE: THIS PART IS INCLUDED IN THE WASH PUMP SERVICE KIT PART # WD19X25700
In Stock
Order now and your part arrives by Mar 21
$37.20
This latch and switch assembly keeps the dishwasher door closed during cycles and signals the control board when it’s safe to run. Made from durable, heat-resistant materials, it helps prevent leaks a...
In Stock
Order now and your part arrives by Mar 21
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GDF535PSR6SS
Viewing 10 of 10Leaking
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Not drying dishes properly
Fixed by these parts
How to fix it
Door latch failure
Fixed by these parts
How to fix it
Will not fill with water
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Will not dispense detergent
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark De from BRONX, NY
- Parts Used:
- WD22X33499
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Spray arm had become unattached and burned by the heat element
It was a simple as: attach and done!
There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!
Thanks for sending genuine GE part ... Read more s!
There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!
Thanks for sending genuine GE part ... Read more s!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Waldorf, MD
- Parts Used:
- WD08X27458
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
A slow drip from the pump area.
Replaced floating seal. Un plugged and Pulled washer out from the counter and laid on its left side. Pull pump out of seal by hand. Straight screwdriver to lever seal out of fitting. Clean hole and wipe seal then push into hole. Reinsert pump reverse install.
To make it easier I previously extended the water supply hose to nearly 8 ... Read more feet so did not have to disconnect it.
To make it easier I previously extended the water supply hose to nearly 8 ... Read more feet so did not have to disconnect it.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from OAKDALE, PA
- Parts Used:
- WD28X34744
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
The service rack vinyl coating had worn off on the rails on the bottom resulting in the metal being exposed and rusted.
Could not do the repair. The incorrect service rack was shipped. It was a different model than what was ordered. It was a different size and would not fit. Had to ship it back at my own expense. Service rack was $77.03 and that has been reimbursed. The return shipping cost to me was $43.75. That expense still has not been reimburse
... Read more
d. I do not want to risk ordering another service rack and risk having to go through the same type of service again.
Read less
Was this instruction helpful to you?
Thank you for voting!