Models > CDT875P2N5S1

CDT875P2N5S1 General Electric Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for CDT875P2N5S1

Viewing 8 of 8
Body Parts 1 Diagram and Parts List for General Electric Dishwasher
Body Parts 1
Body Parts 2 Diagram and Parts List for General Electric Dishwasher
Body Parts 2
Cafe Customization Diagram and Parts List for General Electric Dishwasher
Cafe Customization
Escutcheon And Door Assembly Diagram and Parts List for General Electric Dishwasher
Escutcheon And Door Assembly
Installation Parts Diagram and Parts List for General Electric Dishwasher
Installation Parts
Lower Rack Assembly Diagram and Parts List for General Electric Dishwasher
Lower Rack Assembly
Motor, Sump And Filter Assembly Diagram and Parts List for General Electric Dishwasher
Motor, Sump And Filter Assembly
Upper Rack Assembly Diagram and Parts List for General Electric Dishwasher
Upper Rack Assembly
Keep searches simple, eg. "belt" or "pump".
Dishwasher Lower Rack Roller – Part Number: WD12X26146
$13.60
The roller helps the lower rack of your dishwasher to smoothly slide in and out of your appliance. A broken or worn roller wheel can make it clunky or difficult to get the rack in and out of the dishw...
In Stock
Order now and your part arrives by Mar 19
Door Latch – Part Number: WD21X10490
$47.33
If your dishwasher door will not close or latch, or the machine will not start, you may need to replace the door latch. This genuine OEM replacement latch is meant to keep your dishwasher door closed ...
In Stock
Order now and your part arrives by Mar 19
RACK CARRIER AND ROLLER KIT – Part Number: WD01X35298
$33.94
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146 Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers w...
In Stock
Order now and your part arrives by Mar 19
Countertop Bracket – Part Number: WD01X21740
$36.00
This genuine OEM bracket is used to secure the dishwasher to your cabinetry. The mounting bracket measures approximately 3 inches in length and is made of metal. If you have a solid-surface countertop...
In Stock
Order now and your part arrives by Mar 19
Door Handle Fastener – Part Number: WR01X11007
$14.65
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
In Stock
Order now and your part arrives by Mar 19
Screw 8-16 hxw 1/2 Stainless Steel – Part Number: WD02X10067
$14.65
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
In Stock
Order now and your part arrives by Mar 19
GASKET TUB Stainless Steel – Part Number: WD08X22095
$28.76
This dishwasher tub gasket is a durable replacement designed to create a watertight seal between the tub and door, preventing leaks during wash cycles and protecting surrounding cabinetry from water d...
Special Order
LEVELING LEG – Part Number: WD02X31882
$13.60
In Stock
Order now and your part arrives by Mar 19
SCR B-16 HXW 1/2 Stainless Steel – Part Number: WD02X10169
$14.65
This part is a replacement middle spray arm bearing for your dishwasher. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not r...
In Stock
Order now and your part arrives by Mar 19
Latch Striker – Part Number: WD13X10071
$15.68
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of sec...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Clip Lower Rack – Part Number: WD12X20171
$14.65
In Stock
Order now and your part arrives by Mar 19
TUB TRIMS KIT – Part Number: WD01X31858
$38.06
This part is the replacement tub trim for your dishwasher. It is approximately 26 inches long and 2 inches wide. The tub trim is found on the exterior of the dishwasher, and the main reason you would ...
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for CDT875P2N5S1

Viewing 10 of 10
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not draining
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Will not dispense detergent
Fixed by these parts
Fixing
How to fix it
Replacing the Dishwasher Lower Rack Roller

Replacing the Dishwasher Lower Rack Roller

Replacing the RACK CARRIER AND ROLLER KIT

Replacing the RACK CARRIER AND ROLLER KIT

Replacing the Door Latch

Replacing the Door Latch

Replacing the GASKET TUB Stainless Steel

Replacing the GASKET TUB Stainless Steel

Replacing the Latch Striker

Replacing the Latch Striker

Replacing the DOOR VENT SEAL

Replacing the DOOR VENT SEAL

Replacing the DRAIN TUBE Assembly

Replacing the DRAIN TUBE Assembly

Replacing the Door Spring

Replacing the Door Spring

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from ALBRIGHTSVLLE, PA
Parts Used:
WD21X10490
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door latch not functioning
1. Turn off breaker supplying power to dishwasher in electrical panel
2. Open dishwasher door
3. Unscrew the screws that secure the dishwasher to the counter.
4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch.
5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside.
6. Remove old door latch.
7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in.
8. Plug wire harness into new door latch.
9. Re-align dishwasher and re-secure to counter in previous position.
10. Test latch to make sure it closes properly.
11. Turn on breaker in electrical panel.
The dishwasher should now function properly.
Read less
32 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from MYRTLE BEACH, SC
Parts Used:
WD21X25468
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Dishwasher would not fill with water and would shut off
I found it online! There were step by step instructions that were easy to understand. I have never had to do anything like this in my life, only recently had to start doing everything around the house myself due to husband's illness.
The repairman came out, charged me $100 to determine what the dishwasher needed & left me with the p art number. He was going to charge me $389 to install the part and they were over charging for the part. The repairman suggested I just get a new dishwasher.
I ordered the part from the website at 1/2 the price that the other place charges and found it on line. With the step by step instructions and the online page, I successfully installed it MYSELF. Saved me a ton of $$.
I LOVE the website
Thank You!!!!
Read less
18 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Waldorf, MD
Parts Used:
WD08X27458
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
A slow drip from the pump area.
Replaced floating seal. Un plugged and Pulled washer out from the counter and laid on its left side. Pull pump out of seal by hand. Straight screwdriver to lever seal out of fitting. Clean hole and wipe seal then push into hole. Reinsert pump reverse install.
To make it easier I previously extended the water supply hose to nearly 8 feet so did not have to disconnect it.
Read less
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More