This part is the replacement wash arm bearing for your dishwasher. It is made of black plastic and is approximately 1 1/4 inches in diameter. The wash arm bearing allows the wash arm to rotate when th...
This detergent dispenser controls when detergent and rinse aid are released during the wash cycle. It’s compatible with several dishwasher models across brands like Frigidaire and Electrolux. Common i...
This pressure sensor monitors system airflow or water pressure to regulate cycle timing and machine operation. Symptoms of failure include incomplete cycles, error codes, or irregular airflow. A new s...
Designed to move wastewater from the dishwasher to the drain, this OEM hose fits many models from Frigidaire and affiliated brands. Made from durable materials, it helps prevent leaks and supports pro...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
February 19, 2023
I30 error water draining into tray. Drain hose is clear and cleared water from tray. When restarted it worked bas soon as cycle starts the overflow starts to come out into tray.
For model number FGCD2456QF0A
Hello Chris, thank you for reaching out. According to our research, this message indicates that the dishwasher believes water has flooded inside. To remove any water in the base pan beneath the dishwasher, uninstall the dishwasher and tilt it forward 45 degrees. Restart the dishwasher after doing so, and try again. If the error i30 remains, the likely culprit is the pressure switch, part number FIX11731946, which is designed to signal when to finish filling with water and notify the control board how much water is in the tub. Please test the switch with a multimeter and replace it if found faulty. We hope this helps, good luck with this repair!
