Models > FDB1450CHB1 > Parts

FDB1450CHB1 Frigidaire Dishwasher - Parts

Jump to:

1 - 12 of 96
Keep searches simple, eg. "belt" or "pump".
This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposu...
In Stock
Order now and your part arrives by Mar 19
This is a single lower spray arm found in dishwashers to spray water and detergent vigorously over the dishes. This spray arm is made of plastic, so can warp or crack with time. The holes in the spray...
In Stock
Order now and your part arrives by Mar 19
The door gasket provides a watertight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This ...
Special Order
This is a single rack roller kit for your dishwasher. This kit comes with one axel/clip, and one wheel/roller. The kit is used for the lower dishrack, and allows your rack to move freely. You will nee...
In Stock
Order now and your part arrives by Mar 19
This is a genuine OEM replacement water inlet valve for your dishwasher. The water inlet valve supplies water to the dishwasher by opening and closing the solenoids attached to the valve, depending on...
In Stock
Order now and your part arrives by Mar 19
This is a basket for washing flatware or silverware in your dishwasher.
In Stock
Order now and your part arrives by Mar 19
Sold individually. Grey in color.
In Stock
Order now and your part arrives by Mar 19
This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will ...
In Stock
Order now and your part arrives by Mar 19
The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long
In Stock
Order now and your part arrives by Mar 19
If your dishwasher is leaking from the corners of the gasket, you may need to replace the splash shields. The splash shields attach to the lower front corners of dishwasher and are used to prevent wat...
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
Upper Rack Assembly - T3 PRO. This is the complete upper rack and the wash arm.
In Stock
Order now and your part arrives by Mar 19
1 - 12 of 96