This is a single lower spray arm found in dishwashers to spray water and detergent vigorously over the dishes. This spray arm is made of plastic, so can warp or crack with time. The holes in the spray...
In Stock
Order within the next 39 mins and your part ships today!
The door gasket provides a watertight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This ...
In Stock
Order within the next 39 mins and your part ships today!
This is a single rack roller kit for your dishwasher. This kit comes with one axel/clip, and one wheel/roller. The kit is used for the lower dishrack, and allows your rack to move freely. You will nee...
In Stock
Order within the next 39 mins and your part ships today!
This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will ...
In Stock
Order within the next 39 mins and your part ships today!
This is an authentic OEM door latch assembly for your dishwasher. The latch has a switch that uses an on-off mechanism which prevents the dishwasher from running when the door is opened. If your dishw...
In Stock
Order within the next 39 mins and your part ships today!
This genuine OEM part is a lower spray arm support for your dishwasher. It is found in the bottom of the dishwasher and is the piece that the lower spray arm attaches to. If this part has become damag...
In Stock
Order within the next 39 mins and your part ships today!
If water is leaking from your dishwasher, there may be an issue with your door bottom seal. Also known as a gasket, this strip for the bottom of the door helps to seal the gap between the opening of t...
In Stock
Order within the next 39 mins and your part ships today!
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete i...
In Stock
Order within the next 39 mins and your part ships today!
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
April 6, 2024
Clean light does not come on at end of wash cycle.
For model number FFCD2413US4A
Hello Donald, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the control board, part number FIX12585627, to fix the issue. We hope this sorts out your problem!
Fills a little with water then cuts off won't wash cycle
For model number FFCD2413US4A
Hello Wayne, thank you for reaching out to us. Please ensure that the water inlet tube, part number FIX12746654, is not blocked. If the tube is clear, please check the float switch, part number FIX3492842, the water inlet valve, part number FIX16218688, and the control board, part number FIX16731602. You can test these parts with a multimeter. Good luck with the repair!
Water does not fill in completely even though i tested the inlet valve and the float
For model number FFCD2413US4A
Hello Henri, thank you for contacting us. Provided that the water inlet valve and the float switch are good, the issue is probably related to the control board, part number FIX16731602. It manages the functions of the dishwasher such as filling, washing, draining and drying. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the t
... Read morehing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
