Models > DCR-225-1W-OM

DCR-225-1W-OM Caloric Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for DCR-225-1W-OM

Viewing 28 of 28
Keep searches simple, eg. "belt" or "pump".
This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will ...
In Stock
Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.
In Stock
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
$20.83
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Sold individually.
Special Order
$11.12
This hose clamp is sold individually.
In Stock
This part connects the drain hose to the sink.
Special Order
This high pressure inlet hose washer is black. It is an inch in diameter, made of rubber, and used with many washing machines, refrigerators, and dishwashers.
In Stock
This screw is well under an inch long, and is made of metal.
Special Order
$9.15
This screw is sold individually. Size: 8-32 x 1/4 inch.
Special Order
$1.55
Special Order
Sold Individually. Suggested to replace both at the same time.
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DCR-225-1W-OM

Viewing 3 of 3
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dennis from Tryon, NC
Parts Used:
154106202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Water leaking under the dishwasher
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwa sher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.
77 of 83 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from Chebanse, IL
Parts Used:
WPW10254672
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
I had bought the portable dishwasher from an add in the paper and unfortunately I was unaware that they require faucet adapters and it was not given to me along with the appliance.
I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!!
28 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eric from Holly, MI
Parts Used:
154106202, 5300806833
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Water leaking from under dishwasher
Removed lower trim covers (2 Phillips screws) disconnected power supply at breaker box. Removed wire from heating element, removed (broken) brass nut, unclipped heating element and removed. Removed flat washers and replaced with new grommets. Kind of tricky getting them in there. Also had to lube them with silicone to get the element back through. Installed new brass nuts and installed wire connectors. Reset breaker and started diswasher to verify repair. No leaks, working just fine, reinstalled lower trim covers
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!