Models > SHX4AT55UC

SHX4AT55UC (21) Bosch Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for SHX4AT55UC

Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, ...
In Stock
In Stock
The pump ejects the water from the dishwasher through the drain hose.
In Stock
$5.36
In Stock
$30.46
In Stock
$7.24
In Stock
In Stock
This door cable is for dishwashers. Door cable helps balance and support the weight of the door as it opens and closes.
In Stock
$28.12
In Stock
$56.00
In Stock
$7.70
This part is the replacement screw for your washer. The head is approximately 1/4 inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This...
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for SHX4AT55UC

Viewing 9 of 9
Not draining
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not dispense detergent
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dennis from PLEASANTVILLE, NJ
Parts Used:
00611475
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
rollers broke
pushed with thumb pressure and snapped rollers into place.....EASY
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from STURGEON BAY, WI
Parts Used:
00611475
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
There was a roller missing from the lower washing rack.
There were 5 rollers still in place so I used them to show me how to snap the replacement roller in place.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harper from Charleston WV, WV
Parts Used:
00669221
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Dishwasher was pouring water during the rinse cycle. put the machine up on milk crates to find the source of the leak. The water was coming from the bottom corner of the door. Fount the orig gasket torn
Remove the dishwasher from under the counter. Remove door springs. On the inside of the lip of the door remove the 6 screws that hold the outer door panel on, and remove panel. this will expose hinge screws. Remove the two screws per side holding the inner door to the hinge assembly. Take pictures of the way the gasket's grey plastic end cap assembles between the inner door frame and the hinge, and remove the inner door. The old gasket has a channel lip that sits on the plastic edge of the washer tub, pull it off this lip and discard. Install new gasket and put it all back together! Use this opportunity to clean the gunk out of the upper door seals.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!