Models
>
SHE3AR75UC
SHE3AR75UC (06) Bosch Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for SHE3AR75UC
Viewing 6 of 6Keep searches simple, eg. "belt" or "pump".
$10.28
This is a genuine OEM replacement rack roller wheel for the top rack of your dishwasher. If one of your wheels has become damaged, it can make your rack unbalanced and difficult to pull in and out. Th...
In Stock
$6.08
This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
In Stock
In Stock
In Stock
In Stock
$44.38
This wheel kit is used for the lower rack of your dishwasher. The kit includes 8 wheels and axels. To install you can simply clip the wheel onto the frame. There are eight wheels on the lower rack in...
In Stock
In Stock
In Stock
In Stock
$13.01
This door cable is for dishwashers. Door cable helps balance and support the weight of the door as it opens and closes.
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for SHE3AR75UC
Viewing 9 of 9Leaking
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Door latch failure
Fixed by these parts
How to fix it
Will not fill with water
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Will not dispense detergent
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Catherine from AMHERST, NY
- Parts Used:
- 00611666
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The plastic clip on the roller broke
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and t
... Read more
hen just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from NORTH HALEDON, NJ
- Parts Used:
- 00622058
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Wrench set
The valve allowed water to fill the dishwasher when not in use.
This was the third time I replaced a fill valve in a Bosch diswasher, twice in this unit and once in a previous unit. I read the installation hints on your web site and want to add the following suggestion.
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plu ... Read more g. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plu ... Read more g. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from BIRMINGHAM, AL
- Parts Used:
- 00622058
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Drain Pump runs continuously - inlet valve leaking into bottom tray
disconnected inlet hose and water line from sink, removed old inlet valve and installed new valve and reconnected inlet hose and water line from sink - checked for leaks.
Was this instruction helpful to you?
Thank you for voting!