Models > SHE53C86N/01

SHE53C86N/01 Bosch Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for SHE53C86N/01

Viewing 1 of 1
Part List Diagram and Parts List for Bosch Dishwasher
Part List
Keep searches simple, eg. "belt" or "pump".
Mounting Bracket – Part Number: 00619985
$8.76
This is an authentic metal mounting bracket for a dishwasher, sold individually. The purpose of this part is to secure the top of the dishwasher to the bottom of your counter. If there is no way to mo...
In Stock
Order now and your part arrives by Mar 19
Access Valve – Part Number: 10023852
$30.62
If your dishwasher isn’t filling properly or you're noticing leaks or poor cleaning, this water inlet valve could be the fix you need. It controls how much water enters the tub during each cycle, help...
In Stock
Order now and your part arrives by Mar 19
FILTER-MICRO – Part Number: 00645038
$39.78
Keep your dishwasher running efficiently with this micro filter, which captures fine particles and debris from circulating water during cleaning cycles. By preventing buildup in the pump and keeping d...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Circulation Pump with Heater – Part Number: 12008381
$130.95
This genuine heat pump assembly fits select Bosch, Thermador, and Gaggenau dishwashers. It circulates and heats water during the wash cycle, helping to clean dishes effectively. Replacing a worn or da...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Spray Arm – Part Number: 00745856
$28.42
Get your dishwasher back to peak performance with this replacement upper spray arm. Positioned beneath the top rack, it spins as water flows through its nozzles, helping to clean dishes evenly and eff...
In Stock
Order now and your part arrives by Mar 19
PUMP-DRAIN – Part Number: 00631200
$43.74
This drain pump is designed to remove water from the bottom of your dishwasher at the end of each cycle, helping ensure proper drainage and prevent standing water. Connected to the drain hose, it dire...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Hosedrain – Part Number: 00744881
$27.50
This dishwasher drain hose carries wastewater to your home’s drain system, helping prevent leaks and odors. It’s a direct replacement for damaged or clogged hoses and is compatible with select models....
In Stock
Order now and your part arrives by Mar 19
HOLDER – Part Number: 00616990
$6.25
Introducing the Dishrack Tine Row Holder from Bosch, a high-quality, authentic OEM part designed for dishwashers. This particular component is known for its compatibility with various models from the ...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Holder – Part Number: 00616989
$6.25
Made from sturdy gray plastic, this tine row retainer secures the adjustable tines on the lower rack of select dishwashers. It helps organize dishes and keeps them stable during the wash cycle. Easy t...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Strip – Part Number: 00744998
$16.26
This dishwasher side trim strip kit helps seal the gap between the appliance and surrounding cabinets, creating a clean, finished appearance while also reducing noise and preventing debris from collec...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Screw – Part Number: 00188670
$11.26
On Order
DISPENSER – Part Number: 12008380
$59.14
This center-mounted detergent dispenser fits select Bosch, Thermador, and Gaggenau dishwashers. It holds detergent and rinse aid, releasing them during the wash cycle for effective cleaning. Includes ...
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for SHE53C86N/01

Viewing 10 of 10
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not draining
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not drying dishes properly
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing Fixing
How to fix it
Will not dispense detergent
Fixed by these parts
Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing
How to fix it
Replacing the Dishwasher Circulation Pump with Heater

Replacing the Dishwasher Circulation Pump with Heater

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Raymond from VIENNA, VA
Parts Used:
10023852
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
E:15 error code with Watertap
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.

In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.

I see now why the pump keeps run ning after this error. In this case, it would have led to a big flood in the kitchen if it did not.

I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.

Be sure to turn off breaker before servicing. Don't get shocked!

Be sure to turn off water before starting! Or, you'll have a flood.

Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.

Good luck!
Read less
44 of 66 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from MIDDLEBURY, VT
Parts Used:
20007068
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
The middle rack was rusting and some of the pegs were coming off.
Removed the spray arm, front handle, and little clips from the old rack and installed onto the new rack. Was very simple.
19 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
KATHLEEN from PECONIC, NY
Parts Used:
10023852
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
E15 code basin filling up with water
Turned off electric
Slid out unit - the water connection on this model is in the back
Disconnected the H2O hose. This valve access part is the part that connects the dishwasher to the H2O supply. The soon to be replaced part had sediment in it preventing H2O to go into the dishwasher and into the basin instead. The exploded view of dishwasher was a big help. It was a guess as to why this was happening. Now that I’ve had it apart it makes sense that this is the part that would fail after a period of time, especially if you have city H2O. My husband Bob did this repair.
Read less
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More