Models > SHV7PT53UC > Instructions

SHV7PT53UC (01) Bosch Dishwasher - Instructions

Jump to:

All Instructions for the SHV7PT53UC
1 - 15 of 19
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dennis from PLEASANTVILLE, NJ
Parts Used:
00611475
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
rollers broke
pushed with thumb pressure and snapped rollers into place.....EASY
15 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from AUBURN, IN
Parts Used:
00611323
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
dishwasher not draining, dishes dirty
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from FALMOUTH, ME
Parts Used:
12054183
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Water was leaking below the door. The gasket that seals the door shut was torn from wear and needed replacement
I removed the old gasket easily, it pulled right out. I spent a few minutes cleaning the gunk out from the seam using a standard kitchen cleaner (it was gross and I had to do it multiple times). Tip: pay attention to the shape of the gasket and which side faces in vs. out when pulling out the old one. Also, for reference, take a photo of the old gasket and how it's positioned before pulling it out. Then, simply start at the bottom (either side) and insert the new gasket. Work your way up, over and down the other side. If it's facing the right way it'll go in very easily, if not is will be very difficult—this is how you'll know. After installation, run your dishwasher empty for a full cycle (with towel underneath the door) and check back frequently during the cycle. If there are no leaks you're done. This was the fastest, easiest way to attempt to fix a leaky door and eliminate the gasket as the problem (which it did!) If the machine still leaks the issue is likely something bigger.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phyllis from CLERMONT, FL
Parts Used:
12054183
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Water leak on top of door.
Went to on line video and followed it. The old gasket came right out and the new one fit right in. Started at the top middle and worked the gasket in on both sides to make sure it was evenly spaced.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from Safford, AZ
Parts Used:
00645038
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Poor cleaning of dishes and calcium build up on filter
I watch utube to assess the problem then took eveything apart and saw the build up on the filter, which i had never cleaned. I tried to clean it but was unsuccessful so order the filter from partselect and it came within a couple of days, installed very easily and began to clean as it always had.
8 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jody from OCEANSIDE, NY
Parts Used:
00620774
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
error code e 24 not draining
have had same problem many times under extended warranty pump was changed by factory and installed wrong it was jammed in so take out there is a realest lever and twist clockwise install buy twisting counter clockwize
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
daniel from AUBURN, IN
Parts Used:
00611320
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
dishwasher not emptying tub, dirty dishes when the dishwasher said the cycle was done
easy repair, but the check valve wasn't the problem, it was the float switch that isn't on the tech sheet in the dishwasher or mentioned as a possible culprit anywhere I could find on the internet
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from LEXINGTON, KY
Parts Used:
00645038
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Filter-Micro was clogged with lime from hard water.
Replacement was fast and very simple. Was completed in less than 5 minutes.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from STURGEON BAY, WI
Parts Used:
00611475
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
There was a roller missing from the lower washing rack.
There were 5 rollers still in place so I used them to show me how to snap the replacement roller in place.
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from LAWRENCEVILLE, GA
Parts Used:
10006917
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken lock
Followed instructions from YouTube.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from EDINA, MN
Parts Used:
00645038
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Over the years the filter became too clogged with embedded particles
Really simple. You pull out the drain filter plate and pull the filter off the support and replace. I gave everything a good cleaning and put it back in place.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
james from PARSIPPANY, NJ
Parts Used:
00611475
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Four wheels on the lower dishwasher rack came off and got lost.
I bought replacement wheels.
I put them on the post, and they snapped onto the vertical post very easily. Job done.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phyllis from BAYTOWN, TX
Parts Used:
00611475
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Wheels on the bottom tray broke off
The repair was extremely simple. Just lined up and popped them on. No tools needed.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Seattle, WA
Parts Used:
12054183
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Water leakage from the dishwasher; unknown source.
Followed the video on your site and it was an easy install with no more leakage.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Toni from GREENSBORO, NC
Parts Used:
00611475
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
One Dishwasher bottom rack wheel broke
Popped the new one right on!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SHV7PT53UC
1 - 15 of 19