Models
>
DWA63AB-P1318609W
DWA63AB-P1318609W Amana Dishwasher
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$11.80
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
In Stock
In Stock
In Stock
Special Order
$236.08
This door latch assembly is for dishwashers.
The door latch assembly is at the top of the dishwasher door and keeps the door closed when the dishwasher is running. The assembly may include multiple...
Special Order
Special Order
$14.09
This is a genuine OEM replacement part. This nut is used in a number of appliances. Most often it can be found in the assembly of ranges, air conditioners, cook tops, washers, microwave oven combos, r...
Special Order
NOTE: Spray arm has been updated by the manufacture and is now straight.
No Longer Available
This bisque door latch prohibits the dishwasher from operating when the door is open.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for DWA63AB-P1318609W
Viewing 2 of 2Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ester from LA QUINTA, CA
- Parts Used:
- WPR9900669
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door Springs worn
First: I unplugged the dishwasher.
Second: I removed the two screws that hold the dishwasher in place under the counter.
Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.
Fourth: I removed the worn springs with needle nose ... Read more pliers.
Fifth: I attached the new springs where the old springs were attached.
Sixth I tested to see how the door functioned with the new springs.
Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Second: I removed the two screws that hold the dishwasher in place under the counter.
Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.
Fourth: I removed the worn springs with needle nose ... Read more pliers.
Fifth: I attached the new springs where the old springs were attached.
Sixth I tested to see how the door functioned with the new springs.
Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nydia from Howell, NJ
- Parts Used:
- WPR9900669
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Springs that held up door were broken
I unscrewed the dishwasher brackets (2 of them) from under the counter, slid out the dishwasher. The springs (or broken springs) were visible. I removed them, popped the new ones in and viola!!! The door sprung up like it was new. Of course I slid the dishwasher back under the counter and put the screws back in. This took 15 minutes.
... Read more
I couldn't believe how easy it was. A repair man wanted to charge us $75 just for a service call (plus parts). I repaired for less than $25!!!!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from New Market, MD
- Parts Used:
- R0000298
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken latch assembly
Removed 6 screws exposing the latch assembly. removed 2 screws which secured the assembly to the unit. Unplugged 4 wires. Then reversed the process. 5 minutes.
Was this instruction helpful to you?
Thank you for voting!