ADW750EAC (PADW750EAC0) Amana Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ester from LA QUINTA, CA
- Parts Used:
- WPR9900669
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door Springs worn
First: I unplugged the dishwasher.
Second: I removed the two screws that hold the dishwasher in place under the counter.
Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.
Fourth: I removed the worn springs with needle nose pliers.
Fifth: I attached the new springs where the old springs were attached.
Sixth I tested to see how the door functioned with the new springs.
Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Second: I removed the two screws that hold the dishwasher in place under the counter.
Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.
Fourth: I removed the worn springs with needle nose pliers.
Fifth: I attached the new springs where the old springs were attached.
Sixth I tested to see how the door functioned with the new springs.
Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nydia from Howell, NJ
- Parts Used:
- WPR9900669
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Springs that held up door were broken
I unscrewed the dishwasher brackets (2 of them) from under the counter, slid out the dishwasher. The springs (or broken springs) were visible. I removed them, popped the new ones in and viola!!! The door sprung up like it was new. Of course I slid the dishwasher back under the counter and put the screws back in. This took 15 minutes. I couldn't believe how easy it was. A repair man wanted to charge us $75 just for a service call (plus parts). I repaired for less than $25!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from New Market, MD
- Parts Used:
- R0000298
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken latch assembly
Removed 6 screws exposing the latch assembly. removed 2 screws which secured the assembly to the unit. Unplugged 4 wires. Then reversed the process. 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from West hurley, NY
- Parts Used:
- WPR9900669
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken dishwasher door spring
Remove the screws securing dishwasher to cabinetry; slide the machine out; hook spring into chassis; stretch spring using pliers and attach to arm on washer door. Push the machine back into place, replace screws. Very easy. The spring was delivered in about two days. Piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffery from Waleska, GA
- Parts Used:
- WPR9900669
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
The door springs had worn out.
Removed the bottom plate beneath the dishwasher door and the two top screws that held the dishwasher in place. Pulled the dishwasher out from the cabinets and removed the old springs. Attached the new springs to the linkage and slide the dishwasher back in place. Reattached the bottom plate and the two top screws. Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Denton, TX
- Parts Used:
- WPR9900669
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
both springs broke on washer door
Well, I thought I was going to have to pull the whole dishwasher out and disconnect the supply line and drain line, but I didn't. I just took off the bottom plate, got a flashlight and got on my back on the floor, then by feel I put the plastic spring linkage piece on the door hinges, then by feel I connected the spring to the other end of the plastic spring linkage piece and then connected other end of spring to the right hole on the dishwasher frame (in order to find the right hole I just moved both springs up and down the holes to see which one seemed right.) And that was it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary L from Fallbrook, CA
- Parts Used:
- WPR9900669
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
door stayed fully open
unscrewd screws at the top; grasp the inside top, lifted & pulled out far enough to view springs; checked way they were fastened as there are several holes fot the springs; using pliers, replaced old with the new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Lanse, MI
- Parts Used:
- WPR9900669
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door springs were stretched out of shape
Removed bottom panel and installed new door springs(not necessary to remove dishwasher from cabinet). Verified installation with mirror.
Was this instruction helpful to you?
Thank you for voting!