Models
>
DWS779
DWS779 (Type 20) DeWALT
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DWS779
Viewing 2 of 2Keep searches simple, eg. "belt" or "pump".
$7.01
This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, w...
In Stock
$11.93
This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually.
Ball bearings are used to reduce friction between rotating parts.
The balls or rollers take...
In Stock
$4.99
This is an authentic adapter ring used to mount the saw blade to your miter saw. It is sold as an individual part. Standard 12-inch saw blades have a 1-inch arbor hole, while most miter saw arbors are...
In Stock
$3.99
This is an individual OEM blade bolt for a miter saw, also frequently referred to as a clamp bolt. Its purpose is to fasten the blade onto the miter saw, ensuring it does not become loose while in use...
On Order
$28.36
It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
• 2 Prongs
• 2 Wires
• 14 Gauge
• 10 Feet Long
In Stock
$4.99
This is a manufacturer-approved screw, used to secure the pivot plate on a miter saw. This screw is sold individually. If the pivot plate has become loose due to a damaged screw, or it has rusted or g...
In Stock
$35.94
This is a trigger switch, which controls the on and off and variable speed functions of the power tool. This trigger has four terminals, which will damage and wear with use. If your equipment is not s...
In Stock
$26.11
This is an authentically sourced dust bag for a miter saw. It includes the fabric dust bag, a wire bag support, and the plastic fitting to attach it to your equipment. It also has a zipper to make emp...
In Stock
$9.61
This is an outer clamp for a miter saw and it is sold individually. It works with another flange (sold separately), to secure the saw blade. The shape of the outer clamp is identical to that of the sa...
In Stock
In Stock
$8.28
This part includes one bushing for a miter saw. This bushing is sourced right from the original manufacturer and helps to fasten the blade to the shaft/spindle. If the blade of your miter saw is wobbl...
In Stock
$5.19
This part includes one locking pin for a miter saw. This is an OEM certified part, meaning it is a guaranteed fit. The locking pin is responsible for locking the saw arm in the down position. The lock...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ramiro
June 24, 2022
Do these parts fits in the type 21?Fix10165917, fix10182579, fix10166142, fix10169817, fix10187315, fix10171664.
For model number DWS779
Hi Ramiro,
Thank you for your question. Yes, these parts are listed for model number DWS779. If you need help placing an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Paul
January 26, 2023
My blade appears to be slipping when starting. I’m assuming that the belt is wearing out. Anything else that might be the problem?
For model number DWS779
Hi Paul, thank you for your inquiry. To fix your problem, inspect the following parts: blade adapter ring, part number FIX10166690, bushing, part number FIX10183438, outer clamp, part number FIX10166601, and ball bearing, part number FIX10169633. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Related Parts:
Eric
February 5, 2023
I have developed a blade wobble which doesn't appear to be blade related (i've tried 2 blades with same symptoms). Looking for possible causes and related solutions.
For model number DWS779
Hello Eric, thank you for your question. Our suggested cause is a worn Ball Bearing 6302V FIX10188573. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts: