Models
>
DXPW3625
DXPW3625 (Type 0) DeWALT Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DXPW3625
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$54.74
This is an authentic OEM replacement part that has been sourced directly from DeWalt. This soap injector kit comes with everything you need to replace the injector on your pressure washer. This kit is...
In Stock
Order now and your part arrives by Apr 6
$55.12
This part is sourced from DeWalt and is a manufacturer approved replacement part for DeWalt Pressure washers. For full compatibility, please see the "Model Cross Reference List" below. This valve kit ...
In Stock
Order now and your part arrives by Apr 6
$56.38
This is a genuine OEM replacement part that has been sourced directly from DeWalt. The thermal relief valve helps you operate you pressure washer safely. This part regulates the amount of pressure in ...
In Stock
Order now and your part arrives by Apr 6
$139.84
Sourced directly from DeWalt, this Pressure Seal Kit contains OEM approved replacement seals for select models of DeWalt Pressure Washers. To ensure this is compatible with your machine, please see th...
In Stock
Order now and your part arrives by Apr 6
$46.39
This knob & bolt assembly is an OEM direct from DeWalt. Compatible with several pressure washers, the metal and plastic assembly secures the handle to the frame. No tool should be required for the ins...
In Stock
Order now and your part arrives by Apr 6
In Stock
Order now and your part arrives by Apr 6
In Stock
Order now and your part arrives by Apr 6
$80.10
***This part has been discontinued by the manufacturer. They do, however, offer an alternative of part# 5140186-12 (Outlet Fitting Kit). It is an authentic part that is supplied by the original equi...
In Stock
Order now and your part arrives by Apr 6
$58.27
These are metal seals for the retainer, for correct location and use of these items make sure to check appropriate diagrams of your equipment. Over time seals may get compressed or become brittle even...
In Stock
Order now and your part arrives by Apr 6
$43.50
This is an authentic manufacturer-sourced replacement part which is specially designed for use with DeWALT pressure washers. It helps to provide an air-tight seal between connected components, please ...
In Stock
Order now and your part arrives by Apr 6
$116.56
The hose connects to the gun and to the pump. This item is available as an individual replacement part and is made of metal and rubber. This is a DeWALT replacement part directly sourced from the manu...
In Stock
Order now and your part arrives by Apr 6
$41.86
This water inlet screen is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with several models of DeWALT pressure washers. This part is placed just outsid...
In Stock
Order now and your part arrives by Apr 6
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for DXPW3625
Viewing 2 of 2Leaks water
Fixed by these parts
How to fix it
No or low pressure
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stephan from MANSFIELD, OH
- Parts Used:
- 5140117-51, 5140117-46
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
Pressure washer came up to pressure ,squeeze trigger, total pressure loss
This is on a dewalt pressure washer with A 8.7 12 pump and Honda motor. Removed brass housing taking really good notes of how seals were placed Into housing
This pump is a triplex pump. Removed 3 brass Allen head plugs to expose the 3 checks and the other 3 checks are at the bottom of other 3 ports where the 3 pistons go in.
Us ... Read more ed a needle nose plies to remove checks..Removed seals from piston ports. I used a Oring lubricant to assemble THE NEW SEALS THAT GO IN FIRST WERE VERY VERY HARD TO INSTALL HAD TO PUSH THEM IN THEN SLOWLY WORKED AROUND THE EDGE OF SEAL SLOWLY WORKING DOWN INTO BORE OF HOUSING
THE rest of parts install went easy Bolted unit up,pulled starter rope to rotate pump an motor ok so far
Hooked up water started motor and cleaned items I had out to do. Hope info helps
This pump is a triplex pump. Removed 3 brass Allen head plugs to expose the 3 checks and the other 3 checks are at the bottom of other 3 ports where the 3 pistons go in.
Us ... Read more ed a needle nose plies to remove checks..Removed seals from piston ports. I used a Oring lubricant to assemble THE NEW SEALS THAT GO IN FIRST WERE VERY VERY HARD TO INSTALL HAD TO PUSH THEM IN THEN SLOWLY WORKED AROUND THE EDGE OF SEAL SLOWLY WORKING DOWN INTO BORE OF HOUSING
THE rest of parts install went easy Bolted unit up,pulled starter rope to rotate pump an motor ok so far
Hooked up water started motor and cleaned items I had out to do. Hope info helps
Read less
Was this instruction helpful to you?
Thank you for voting!