Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chuck
March 25, 2022
Will not power up with battery or cord
For model number DCR028B
Hello Chuck, thank you for your question. You can check your charger with a multimeter. Plug in your charger to an electrical outlet. Remove any batteries you may have charging in the unit. Set the dial on the voltmeter to "Ohms" and test the voltmeter. Touch the leads of the voltmeter together. The reading should be "0.00," but a variance of .05 is acceptable. Touch the lead wires on the voltmeter to the lead wires on the battery charger. Set the dial to the highest volt setting on the voltmeter. Touch the power lead on the voltmeter to the power lead on the battery charger. Touch the ground lead (the black lead) on the voltmeter to the negative (or ground) lead on the charger. The voltage output on the voltmeter should be the same as the voltage setting on the charger. If it is not, the charger is malfunctioning and must be replaced. We hope this helps.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
