DTH20 (DTH 20) Husqvarna Dethatcher

This part is the replacement finger for your dethatcher. It is made of metal and is approximately 4 inches long and 1 inch wide. It has a one semi-circular convex tapered end, and one concave tapered ...

This part is the replacement satellite shaft for your dethatcher. It is approximately 10 inches long and ½ an inch wide. The satellite shaft links the rake fingers and the dethatcher shaft. If your sa...

This is a replacement spacer for your dethatcher or sod cutter. The spacer runs between the tines so that they are not rubbing up against each other or grinding. If the spacer is worn down or damaged,...

This part is the replacement roll pin for your dethatcher. It is made of metal and is approximately 1/8 inch by 7/8 inch. The roll pin fits into slots on the satellite shaft and helps to secure it as ...