Models
>
AD25TJ3
AD25TJ3 Whirlpool Dehumidifier
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AD25TJ3
Viewing 3 of 3Manuals & Guides for AD25TJ3
Click to downloadKeep searches simple, eg. "belt" or "pump".
In Stock
In Stock
$5.42
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
In Stock
$102.77
This part is used to prevent water overflow when the bucket gets full.
In Stock
Special Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Steven from Owings Mills, MD
- Parts Used:
- WP1172075
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the dehumidifier was not shutting off when water level was full
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- barbra from STERLING HTS, MI
- Parts Used:
- WP1172075
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
float was missing
pried off the plastic fastener with flat blade screw driver set new float in place then pressed plastic fastener back in place
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lester from Brazil, IN
- Parts Used:
- 1188814
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Push on connectors and switch housing were different
The switch housing was not exactly the same for easy snap in. I removed the actual switch and installed it into the old housing. Then I found that the male pins were larger than the old ones. I chose to clip off the female connectores, strip the wires, and solder the wires to the pins on the switch. It was easier for me than attempting to
... Read more
change the push on connectors. For me, the actual switch was what I wanted and I fixed it my way. It was easy to do however some folks may want to change the push on connectors. Works great and saved me hundreds of dollars. Thanks.
Read less
Was this instruction helpful to you?
Thank you for voting!