Models > BPDH2500AS2

BPDH2500AS2 KitchenAid Dehumidifier

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for BPDH2500AS2

Viewing 3 of 3
SECTION
SECTION
SECTION
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP488729
$7.64
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Water Inlet Hose Washer – Part Number: WP16123
$7.68
Sold Individually. Order quantity needed.
In Stock
Single Hex Head Screw – Part Number: WP489069
$5.40
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
Condensation Drip Pan – Part Number: 951901
Used with dehumidifiers.
No Longer Available
Humidistat Kit – Part Number: WP1166055
No Longer Available
Screw - 8-32 X 1-1/4 – Part Number: WP488163
$4.87
Sold individually.
In Stock
Screw – Part Number: WP3177991
$7.68
Sold individually.
In Stock
Switch – Part Number: 999747
Full bucket switch.
No Longer Available
Zip Tie – Part Number: WPW10339879
$7.76
In Stock
Screw – Part Number: WPW10141625
$11.62
Sold individually.
In Stock
Start Relay – Part Number: 598215
No Longer Available
VALVE – Part Number: 978030
$47.84
In Stock
Back to Top View More
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top

Common Problems and Symptoms for BPDH2500AS2

Viewing 1 of 1
Leaking
Fixed by these parts
How to fix it
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Carl from Tuscaloosa, AL
  • Parts Used:
    999747
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Dehumidifer collection pan (bucket) overflowing with water
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and replace.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More