Models > BPDH4000AS3

BPDH4000AS3 KitchenAid Dehumidifier

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for BPDH4000AS3

Viewing 2 of 2
SECTION
SECTION
Keep searches simple, eg. "belt" or "pump".
Single Hex Head Screw – Part Number: WP489069
$5.40
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
Screw – Part Number: WP3177991
$7.68
Sold individually.
In Stock
Switch – Part Number: 999747
Full bucket switch.
No Longer Available
Compresser Mounting Kit – Part Number: 4388295
$68.76
In Stock
Zip Tie – Part Number: WPW10339879
$7.76
In Stock
Start Relay – Part Number: 598215
No Longer Available
Strip Seal – Part Number: 1158732
No Longer Available
OVERLOAD – Part Number: 1163837
No Longer Available
Strain Relief – Part Number: 308613
No Longer Available
CORD-POWER – Part Number: 950744
No Longer Available
KNOB – Part Number: 1162670
No Longer Available
BLADE-FAN – Part Number: 949645
No Longer Available
Back to Top View More
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Stephen from Richfield, NC
  • Parts Used:
    1166055
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
The humidifier would run continuously regardless of the humidity setting.
I removed the old humidistat and replaced it with the new one which was an exact fit.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Carl from Tuscaloosa, AL
  • Parts Used:
    999747
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Dehumidifer collection pan (bucket) overflowing with water
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and replace.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More