Models > BPDH5000FS0

BPDH5000FS0 KitchenAid Dehumidifier

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for BPDH5000FS0

Viewing 3 of 3
SECTION Diagram and Parts List for KitchenAid Dehumidifier
SECTION
SECTION Diagram and Parts List for KitchenAid Dehumidifier
SECTION
SECTION Diagram and Parts List for KitchenAid Dehumidifier
SECTION
Keep searches simple, eg. "belt" or "pump".
Water Inlet Hose Washer – Part Number: WP16123
$7.95
Sold Individually. Order quantity needed.
In Stock
Single Hex Head Screw – Part Number: WP489069
$5.36
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
Screw – Part Number: WP488234
$9.13
This screw is sold individually. Size: 8-32 x 1/4 inch.
Special Order
Humidistat Kit – Part Number: 1166055
No Longer Available
Compresser Mounting Kit – Part Number: 4388295
$80.13
In Stock
Switch – Part Number: 999747
Full bucket switch.
No Longer Available
Zip Tie – Part Number: WPW10339879
$8.04
In Stock
Putty – Part Number: 212643
$52.45
Permagum sealer for refrigerant line insulation.
In Stock
VALVE – Part Number: 978030
$49.53
In Stock
Strip Seal – Part Number: 1158732
No Longer Available
Access Valve - 5/16 Inch – Part Number: 978026
$42.60
In Stock
Valve, Access (1/4``) – Part Number: WP978025
$38.93
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for BPDH5000FS0

Viewing 1 of 1
Leaking
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Stephen from Richfield, NC
  • Parts Used:
    WP1166055
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
The humidifier would run continuously regardless of the humidity setting.
I removed the old humidistat and replaced it with the new one which was an exact fit.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Carl from Tuscaloosa, AL
  • Parts Used:
    999747
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Dehumidifer collection pan (bucket) overflowing with water
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and replace.
Was this instruction helpful to you?
Thank you for voting!
View More