Models
>
FED30P1
FED30P1 Frigidaire Dehumidifier
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FED30P1
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
This control knob is a little over an inch in diameter. It is beige in color and is made of plastic. This knob has a blue indicator line, and will accept a 'D' shaped shaft.
No Longer Available
This control needs to be replaced if the dehumidifier won't shut off.
No Longer Available
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jonathan from New Oxford, PA
- Parts Used:
- 5303296823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Unit would run continuously and not shut off
Removed the front cover and then the humidistat from the bracket. Two push on wire connectors and then reversed. Very straightforward and excellent part matching. Given the prices for new dehumidifiers it was great to breathe life back into this unit which does its job well. Thanks for the easy to use web site and fast fast service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from MARINETTE, WI
- Parts Used:
- 5303306080
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The float turned up missing during a move to another city.
The repair was just putting the float into the inside of the tank itself and then, inserting the two pins (left and right) into each slot so the float operates up and down freely.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kerwin from BUFFALO, NY
- Parts Used:
- 5303296823
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dehumidifier would not shut off automatically
Remove the front cover 2 screws on the bottom. Then removed the clip for the full light, then removed 2 more screws that held the humidistat. Removed the 2 power wires removed part. Reverse the uninstall procedure. Done
Was this instruction helpful to you?
Thank you for voting!