Models
>
FFAD5033W10
FFAD5033W10 Frigidaire Dehumidifier
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FFAD5033W10
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
Special Order
In Stock
In Stock
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
October 30, 2021
Dehumidifier running but not producing much water, in a room with a temp. Of 71 degrees and a humidity level of 53 %. What would be the cause of its failure to remove water from the air ?
For model number FFAD5033W10
Hi Richard,
Thank you for your question. If your dehumidfier is not pulling water from the air, there are some parts that you will need to check to see which one is causing the issue. You will need to check the capacitor, the overload, the fan motor and the electronic control board. You will find the information on how to test these parts under Free Repair Help and Instant Repairman on our website. We hope this helps! Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
October 22, 2022
How can I get rid of my coils icing up? Unit stop working after 3-4 hours and shows ec error code event if temp and humidity are above unit working spec.
For model number FFAD5033W10
Hello Dave, thank you for your question. We have a link on our site that should answer your question. https://www.fix.com/repair/appliance/dehumidifier/coils-icing-over/. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
STEPHEN
October 26, 2022
The bucket full warning does not work because the metal strip that depresses the bucket full warning and is controlled by the float arm at the top of the bucket which pivots as the water rises thus releasing the the bucket full warning and shuts down the dehumidifier is missing. This strip must have fallen off and went down the toilet when i emptied the bucket. How do i fabricate this small but vital metal strip?
For model number FFAD5033W10
Hello Stephen, thank you for asking. We have researched your model and found that the strip comes with the whole assembly. You may need to replace the bucket assembly, part number PS12746638. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Was this helpful?
Thank you for voting!
Related Parts:
Gary
February 14, 2024
When the dehumidifier is plugged into an electric outlet, the unit makes a buzzing noise even though the unit is not turned on. When the on/off button is depressed, the unit seems to work normally with the fan turning on. When the on/off button is again depressed, the fan turns off, but the loud buzzing continues until the unit is unplugged from the electric outlet. Any idea what might be causing this?
For model number FFAD5033W10
Hello Gary, thank you for reaching out. Based on the description that you have provided, we would recommend checking the power cord. If it does not resolve the issue, then you may need to replace the cover assembly, part number FIX12746642, to solve the problem. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts: