This is a genuine OEM replacement part, it is sold individually. The purpose of the Fuel Pick--Up Line with Filter is to provide fuel into the carburetor via the primer bulb. The filter is situated in...
The purpose of the 791-182352 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. Over time the Fuel ...
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
This switch is used on a variety of trimmers, blowers and other similar gardening equipment. This switch controls the on and off operations of your tool. Switches have mechanical internals, which degr...
This is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. The metal clutch goes between the clutch drum and the clutch washer. It helps to spin the cutting ...
This is for the original clutch. This is just the drum. If you need the clutch pawl and washers you will need to get the knew version Assembly part number 791-182369, because the original internal par...
This is an authentic replacement part that has been sourced from the original manufacturer to be used with trimmers from Ryobi, MTD, Troy-Bilt, Yard-Man, and Bolens. The recoil spring is part of the s...
This is a high quality OEM supplied replacement hardware that is specially produced for use with lawn and garden equipment. It is a standard hardware that has multiple uses depending on the unit, plea...
This is a genuine OEM part. The int. cotter pin 5/16 & #34 dia. is constructed of durable metal. The part is compatible with a variety of lawn and garden tools and machines. It is recommended to refer...
The anti-rotation screw attaches to the lower handle clamp. This item is priced individually and is made out of metal. It is a genuine replacement part used in compatible tillers, trimmers, and blower...
In Stock
Order now and your part arrives by Jun 15
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MB
September 6, 2023
There are 2 fuel lines, green colored & clear,
from the carburetor leading to the gas tank.
The gas tank has 2 separate holes to receive the lines
Which line from the carburetor is to be connected to the fuel filter in the fuel tank ?
For model number 21AT144R966
Hi Mb, thank you for reaching out. We have found that the green line in your model is the fuel return line and the clear line, part number FIX10014339, is the fuel line assembly. The green line attaches to the purge bulb and fuel tank in order to return fuel back to the tank after the primer bulb is pressed. The clear line or the fuel line assembly is connected to the fuel tank. The fuel line assembly comes with a filter. We hope this information helps!
need to know where each of the 2 fuel line is to be located in the tank
hope you can help
For model number 21AT144R966
Hello Mark, thank you for the question. Both the fuel lines are located on the top of the tank, just in the vicinity of the fuel tank lid. We hope this information helps!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
_WW_1.gif "Page A Diagram and Parts List for 2005 Troy-Bilt Cultivator")
_WW_2.gif "Page B Diagram and Parts List for 2005 Troy-Bilt Cultivator")
_WW_3.gif "Page C Diagram and Parts List for 2005 Troy-Bilt Cultivator")
