Models > 580676620

580676620 Craftsman Pressure Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 580676620

Viewing 1 of 1
Pressure Washer Diagram and Parts List for Craftsman Pressure Washer
Pressure Washer

Manuals & Guides for 580676620

Click to download
Manual
Owner's Manuals
(6.38MB)
Keep searches simple, eg. "belt" or "pump".
Garden Hose Filter – Part Number: B2384GS
$6.69
This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose f...
On Order
Hose – Part Number: 189971GS
No Longer Available
Kit – Part Number: 200278GS
Kit
No Longer Available
Thermal Relief Valve – Part Number: 208673GS
$23.01
This is a genuine OEM replacement part sourced directly from Craftsman. The thermal relief valve regulates the amount of pressure in the line at any given time. Once the pressure in the line reaches ...
In Stock
Order now and your part arrives by Jun 4
O-Ring Kit – Part Number: 705001
$28.77
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually ...
In Stock
Order now and your part arrives by Jun 4
Kit, Handle Fastening – Part Number: B2203GS
$8.25
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing ...
In Stock
Order now and your part arrives by Jun 4
Hose – Part Number: 708962
$68.19
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it...
Special Order
Kit, Chemical Injection – Part Number: 200279GS
$35.30
This is available as a kit that contains all the necessary parts. These are OEM Briggs & Stratton and Troy-Bilt parts directly sourced from the manufacturer for use in pressure washers. They are made ...
In Stock
Order now and your part arrives by Jun 4
Wand, Hi-lo – Part Number: 205015CGS
$87.95
This is an authentic OEM part for use with Craftsman Pressure Washers. The wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reasons for replac...
In Stock
Order now and your part arrives by Jun 4
PIN-RND HD DRILLED .3 – Part Number: 1672344SM
$9.81
Special Order
Gun – Part Number: 708807
Gun
$87.96
Special Order
KEY, 3/16 SQ X 1 – Part Number: 23139GS
$2.99
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 580676620

Viewing 1 of 1
Leaks water
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Anthony from RIDGEFIELD, CT
Parts Used:
189971GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Supplied hose has "press on" fitting on one end, washer does not accommodate it
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Read less
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More