Models > SCS3614GB0 > Instructions

SCS3614GB0 Whirlpool Cooktop - Instructions

Jump to:

All Instructions for the SCS3614GB0
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Fredrick from Rockford, MI
Parts Used:
WP8053456
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burner grates crumbling from use and age.
Replaced the grates. Very pleased. Great service, correct parts, happy customer.
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from OLYMPIA, WA
Parts Used:
WPW10447925
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Peeling paint grate
Remove old grate place new grate on gas stove top
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joseph from YONKERS, NY
Parts Used:
WPW10447925
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
burner grates were very scaley(rough)
exchanged old with new
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from DELANO, MN
Parts Used:
WP8053421
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No spark to any of the burners
I slid the range out about 8 inches from the wall, and having unplugged the range and looked at the diagram from the Parts Select site, I used a mirror and screwdriver to remove the screws holding the small rear cover. From there I removed the one screw holding the spark module and that way I was able to hold the old and new one side by side to move the wires. Reversed the process, easy peasy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Ladera Ranch, CA
Parts Used:
3191293
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Worn out spring assembly in valve.
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph W from Anaheim, CA
Parts Used:
WPW10447925
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burner Grate coating was damaged
Remove old grate and replace with new one.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Oakton, VA
Parts Used:
WP8053456
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced a stove burner grate
No tools necessary. Shipment was extremely quick; I was very pleased.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SCS3614GB0
1 - 7 of 7