Models > GLT3057RT00 > Instructions

GLT3057RT00 Whirlpool Cooktop - Instructions

Jump to:

All Instructions for the GLT3057RT00
1 - 15 of 15
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Carolyn from Bellingham, MA
Parts Used:
WPW10110491
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Top burners would not light. No "clicking" .
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
21 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MICHAEL from LONGVIEW, TX
Parts Used:
WPW10110491
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
gas burners would not automatically light when gas turned on
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as she had been using matches and burning her finger tips,since the original range part malfunctioned. The only problem was the small screw from the original installation was not long enough , so it required some changes to get it affixed to the cabinet side.Thanks for the reasonable price and the right part for the job!!
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandra from ASTORIA, NY
Parts Used:
WPW10110491
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
One of the burners was not igniting.
We replaced the part. It was pretty quick and easy to install.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Darrel from Kewaunee, WI
Parts Used:
WPW10110491
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Spark Module malfunction, won't spark
Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in the same slot number. Works fine.
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Grove City, OH
Parts Used:
WP4456905
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
igniter short circut
Replace igniters
15 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from COLORADO SPGS, CO
Parts Used:
W10854242
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Plastic anchor tips broken.
Removed the broken items and replaced.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from RAINIER, WA
Parts Used:
WP3180081
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob skirt clips (2 of 4) broken
Gently pressed the lower two clips onto my thumbs as I pressed the skirt into the cooktop skirt hole. Be gentle or you can break the new skirt!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ray from POST, TX
Parts Used:
WP3180081
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Grommet broken
Good
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Sequim, WA
Parts Used:
WP3180081
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the little tabs that hold the skirt in the hole break off
I pulled the knobs off, lifted the broken skirts out and snapped the new ones in.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Norman from Tustin, CA
Parts Used:
WP3180081
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
backing for stovetop knobs
the decorative backings on our stovetop knobs had become frayed, and I simply pried off the old ones,and installed the new ones. I have use Parts Select for years for various parts replacement, their service is quick and accurate. When I need a part, I always check here first.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CAROL from BARTONVILLE, IL
Parts Used:
WP8286153CG
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
While remodeling my kitchen I threw way the caps for my new cooktop.
There wasn't really anything to fix. I just had to put the burner caps on. I will say though that the service that I got and the people I talked to on the phone were wonderful. I got what I requested the first time but it was not the right part. I then called and they let me return the wrong part and the second time the order was not correct. (my fault) They are not only sending me the correct part, but they also credited the shipping. I will definitely will use Part Select again.They were great.
Was this instruction helpful to you?
Thank you for voting!
Customer:
larry from Boulder city, NE
Parts Used:
WPW10110491
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
no spark on stove top (gas)
Repair was super simple . Any one could have done it.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leanne from Huntingtown, MD
Parts Used:
W10854242
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old skirts tabs broke off with age
Just replaced them.
Was this instruction helpful to you?
Thank you for voting!
Customer:
scott from carrollton, GA
Parts Used:
WP3424F031-81, WP3424F030-81
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
old drip bowls needed replacement
The repain involved removeing two screws in each of the burners. Easy to fix. Looks like new now for a fraction of the cost of replacement.
Was this instruction helpful to you?
Thank you for voting!
Customer:
doug from ramsey, IL
Parts Used:
WPW10110491
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burners would not lite, no spark
pull out the stove,took the top back panel off, take off wires one at a time on new spark module.. easy
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GLT3057RT00
1 - 15 of 15