Models
>
SGCS365RS
SGCS365RS Thermador Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for SGCS365RS
Viewing 5 of 5Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
In Stock
On Order
In Stock
In Stock
In Stock
In Stock
$66.38
Sold individually.
This burner cap is for cooktops. Burner cap fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
Special Order
$125.43
This burner cap is for cooktops. Burner cap fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
December 31, 2021
The two burners with extra low settings go out when the knob is turned to those settings. Otherwise the burners adjust just fine.
For model number SGCS365RS
Hello Steve, thank you for your question. Your symptoms indicate a switch issue. Please check the POTENTIOMETER FIX8713461 and the Switch part FIX8707263. This switch causes the spark ignition system to ignite the burner. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Charlie from INDIAN SPGS, AL
- Parts Used:
- 00422749
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
Part discontinued by Bosch. Found replacement part at Parts Select
Removed knobs and venturies. Unplugged electrical inputs. Lifted top plate. Replaced potentiometer. Replaced parts and plugged in electric supplies. Tested. Piece of cake, except for locating replacement potentiometer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- richard from HOPATCONG, NJ
- Parts Used:
- 00189343
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
the lens did not fit It did not fit in the hole of the range top
I has to file the bottom edge on a slight angle so the lens would fit in the hole. Also I had to file the top edge cause it had little tabs and and also had to file the edge below the top of the lens then it would snap in so I have to say the woman I talked to said she guaranteed me it would fit and it didn't
Was this instruction helpful to you?
Thank you for voting!