Models > TGC8X3XCC3

TGC8X3XCC3 Tappan Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for TGC8X3XCC3

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
Sold individually.
In Stock
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
$51.87
Special Order
Sold Individually.
In Stock
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
No Longer Available
No Longer Available
***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
In Stock
$14.79
On Order
$12.00
Special Order
No Longer Available
No Longer Available
$50.85
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for TGC8X3XCC3

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jonathan from Arkport, NY
Parts Used:
5303912606
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
My burners would not light. There wasn't the tell tale "click, click, click" of the spark module.
First I had to slide the stove out of its cubby and then I removed the two screws holding on the shield. I next removed the wires going to the spark module. I removed the top screw and loosened the bottom one. Installed the new spark module in reverse order. Less than 15 minutes for whole repair. Still have problems with spark module not working if oven is on, but I think it is because there is no air circulation behind the stove.
15 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jose from El Paso, TX
Parts Used:
5303912606
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
tHE ORIGINAL MODULE DIED AFTER 21 YEARS OF SERVICE
First had to move the stove out of its "nest", take the side cover off, remove 1 screw and loosen the other , take the old module out and reverse the operation. That simple.
Part was supplied 1 day before promised date, awesome. Part fitted exactly as the OEM part, works like a charm, everyone happy.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sue Z from Los Angeles, CA
Parts Used:
316055800
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Grates were old and rusted and scratching the bottom of my pots
I threw the old ones out and replaced them with the new ones. It was a no-brainer :) The parts arrived super fast. Great, no hassle service.
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!