Models > 14-3038-08-02

14-3038-08-02 Tappan Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 14-3038-08-02

Viewing 2 of 2
BURNER, MANIFOLD AND GAS CONTROL Diagram and Parts List for Tappan Cooktop
BURNER, MANIFOLD AND GAS CONTROL
COOKTOP PARTS Diagram and Parts List for Tappan Cooktop
COOKTOP PARTS
Keep searches simple, eg. "belt" or "pump".
Burner Grate – Part Number: 316055800
$37.34
Sold individually.
In Stock
Order within the next 11 hrs and your part ships today!
Spark Module - 120V – Part Number: 5303912606
$106.22
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
Order within the next 11 hrs and your part ships today!
Igniter Switch – Part Number: 316032002
$55.82
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Special Order
Bushing – Part Number: 318146301
No Longer Available
CONTROL-REGULATOR – Part Number: 5303016997
$179.36
Special Order
ROD – Part Number: 3016817
ROD
$18.53
Special Order
BURNER-TOP – Part Number: 5303320654
No Longer Available
SCREW – Part Number: 316048200
No Longer Available
BUSHING – Part Number: 5304513507
$13.12
Special Order
BURNER – Part Number: 3201435
$283.78
In Stock
Order within the next 11 hrs and your part ships today!
SPACER INSTALATION – Part Number: 3205315
$10.29
Special Order
USE WCI 318021204 – Part Number: 3205201
$76.98
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 14-3038-08-02

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jonathan from Arkport, NY
Parts Used:
5303912606
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
My burners would not light. There wasn't the tell tale "click, click, click" of the spark module.
First I had to slide the stove out of its cubby and then I removed the two screws holding on the shield. I next removed the wires going to the spark module. I removed the top screw and loosened the bottom one. Installed the new spark module in reverse order. Less than 15 minutes for whole repair. Still have problems with spark module not working if oven is on, but I think it is because there is no air circulation behind the stove.
Read less
15 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Duff from Buena Vista, CO
Parts Used:
316032002
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
gas ignitor continued to run after turned on or off
Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals unde r the drip pan was broken and needed replaced. I would recommend ordering these also. Turned out this was a good time to give everything a goo cleaning then replace as removed.
Read less
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jose from El Paso, TX
Parts Used:
5303912606
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
tHE ORIGINAL MODULE DIED AFTER 21 YEARS OF SERVICE
First had to move the stove out of its "nest", take the side cover off, remove 1 screw and loosen the other , take the old module out and reverse the operation. That simple.
Part was supplied 1 day before promised date, awesome. Part fitted exactly as the OEM part, works like a charm, everyone happy.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More