MGC5430BDW21 Maytag Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Carolyn from St. George, UT
- Parts Used:
- WP7518P465-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
black dirty burner grates
replaced grates
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Allen, TX
- Parts Used:
- WP3801F935-51, WP7101P062-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
new countertops required remounting the gas cooktop
A very simple repair.
I inserted the brackets and screwed them in position
I inserted the brackets and screwed them in position
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from Rochester, NY
- Parts Used:
- WP74011276
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
the original knob was damaged from the broiler when I opened the oven door
had to put the old knob back on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Penny from Mansfield, OH
- Parts Used:
- WP74011276
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
burner know had cracked.
Took old burner knob off by lifting it up & pushed on the new one. The new did not go down as far so I will be replacing all of them so it looks better.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerald from Loveland, OH
- Parts Used:
- W11170853
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Wrench (Adjustable), Wrench set
Missing regulator when floor model gas cooktop was purchased
1. Apply gas pipe joint sealer to treaded nipple on bottom of cooktop; 2. Install regulator on nipple with regulator direction arrow pointing to top of cooktop; 3. Tighten but do not overtighten as it may crack the aluminum body regulator; 4. Make sure the face of the regulator with the green painted surface faces the outside of the cabinet; 5. Get a new gas flex hose to connect to gas pipe (got mine at Lowe's - 2 feet long with all the right fittings for about $15). 6. Follow instructions on gas flex hose - make sure you use gas pipe joint sealer only where indicated; 7. Turn gas shutoff valve back on and test for leaks using soapy water; 8. Turn on each cooktop burner to bleed out air.
Was this instruction helpful to you?
Thank you for voting!